LG G2 Problem Fixed

There are some problems and with Lg G2

1.Sim card disable (sim not working)

2.Phone showing memory only 9.7 GB, actually you have 16 GB or 32 GB
3.Touch is not properly working (you can't click where you want)

Cause:

These problems occurs after Upgrading.

*If you think you have Lg g2 D802 but it is D800 actually, You can confirm that what model you are using by this way....
*Remove the cover and read the model written in white color,
*if it is D800, so you can fix these all issues
step by step :)

*First you need to Root your phone
*After root download build.prop editor from google play store.
*And since touch is not working you need to operate your phone via usb mouse and otg cable.
*When you open build.prop
*You will see on a line there is written something like that.

*Model ro no. D802.
*You need to change d802 to d800 and save.
*To check that its done or not, go to Setting>General>About Phone>Hardware information( you will see) Model number : LG-D800
*Now restart your phone.
*Once restart check your phone model in settings if it is d800 now congratz.
*U can flash kitkat firmware of d800 via tot method.
*Everything will work.

Step #1: Program Installation

1. Save the installer to your desktop
2. Run the Installer by double clicking
3. Wait a while for everything to extract (It might look like nothing is happening. This can take a few minutes, be patient, it’s HUGE)
4. (On Win7 or Win8, Accept User Account Control)
5. Accept my License
6. Don't Change Anything and click ‘Install’
7. Wait some more… and more… Large files are extracting…
8. When it pops up, click ‘Next’ to install the LG drivers. Even if you’ve already installed them, install again! This is to verify you’ve got the right ones installed.
9. Click ‘OK’ to finish the Driver install
10. Click ‘Next to install the LG Flash Tool
11. Don't Change Anything and click ‘Install’
12. Uncheck ‘Run LGFlashTool 1.8.1.1023 and click ‘Finish’ (If you forget to uncheck this, just close the program when it opens)
13. Click ‘Next’ to start the LGFlashTool Patch. (This makes it so you don’t need to change the date back on your PC)
14. Copy Megalock.dll file in flash tool folder
15. Go to C drive you will see a folder "LG" open that folder and paste megalock.dll.
16. Click on replace it.
17. Congratulations, Program Installations are all DONE!

Step #2: Place Phone into Download Mode

1. With phone NOT plugged into a USB Cable, Hold the Power button to turn off phone
2. Plug your USB cable into your computer
3. Hold the Volume UP Button on your Phone
4. While Still Holding the Volume UP button, plug in the USB cable to your Phone
5. Continue to hold the Volume UP button until your phone enters Download Mode

6. If this does not work, pull the USB cable and start from #1 of this section

Step #3: Change Com Port to 41

1. With your phone STILL in Download Mode and STILL Plugged into Computer
2. Go into Device Manager
---a. Press and hold your Windows Key (Between CTRL and ALT)
---b. Tap the ‘Pause/Break’ Key (Usually Top Right of Keyboard, might be different on yours)
---c. Click on ‘Device Manager’
3. In the Device List, scroll down to ‘Ports (COM & LPT) and double click to expand
4. Find the ‘LGE AndroidNet USB Serial Port (COM4)’ (Your COM Port Number might be different, that’s OK)
5. Double click to open the port
6. On the Tabs at the top of that screen, click on ‘Port Settings’
7. Click on ‘Advanced…’
8. Click on the Com Port number to drop down the list
9. Scroll down to ‘COM41’ and select it
10. Click ‘OK’ Button to save that
11. Click ‘OK’ Button to close the Com Port Properties
12. Close the Device Manager
13. Close the System Window
14. Go back to the Desktop
15. That’s it, You’ve Changed the Com Port to 41

Step #4: Run LGFlashTool

1. Double Click the ‘LGFlashTool’ icon on the Desktop (Win7 or Win8 accept ‘User Account Control’)

2. In the ‘Model Config’ window, check the box ‘Select Manual Mode’

3. Next to the DLL space, click the Three Dots ‘…’

4. Select the DLL file named ‘LGD800_.....v160.dll’

---a. For 4.4.2 KitKat, select ‘LGD800_20130811_LGFLASHv160.dll’

---b. For 4.2.2 JellyBean, select ‘LGD800_20130904_LGFLASHv160.dll’

5. Click the ‘Open’ Button

6. Next to the S/W space, click the ‘Remove ALL’ Button

7. Next to the S/W space, click the ‘Add’ Button

8. Select the tot file for the version you are flashing

---a. For 4.4.2 KitKat, select ‘LGD800AT-01-V20c-310-410-FEB-02-2014+0.tot’

---b. For 4.2.2 JellyBean, select ‘LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot’

9. Click the ‘Open’ Button

10. Click ‘OK’ Button to save choices

11. In the LG FlashTool program, click the ‘Yellow Arrow’ pointing to the Right.

12. Wait for the program to verify your DLL and TOT selections (This takes a while)

13. If successful, you will see ‘READY!!’ on ‘Port 1 (COM41)’

14. If you DON’T see ‘READY!!’, you may need to start over

15. If you see ‘READY!!’ unplug your phone from the USB cable and Plug it right back in. DO NOT PRESS ANY BUTTONS ON YOUR PHONE. It should STILL be in Download Mode.

16. The LG FlashTool progam will now start flashing your phone!!

17. At around 80%, the program will restart your phone.

18. It takes a while for the phone to restart, but it will boot to Android. Wait for the flash program to finish and it will turn your phone back OFF. And give you a ‘SUCCESS”

19. Close FlashTool

<----Downloads---->